192.168.1.2 is an IP address that is usually used by some manufacturers to give users the access to their IP gateway. By using this IP address, you can access you are web interface by which you can configure your router’s main settings. This local ipv4 address can change your router’s default password, network refresh rate, other SSID configuration.

So in this article, we will learn more about this 192.168.1.2 IP address. How to login to it how to use it to change your router settings, and how to reset your router if you forget the default credentials. Let’s start the process.

How To Access 192.168.1.2 IP Address

You are the simple steps which you need to follow to access this IP gateway.

• First, you will have to enter this http://192.168.1.2 IP in your browser address bar or simply click on “Access Router Panel” button mentioned below.

Access Your Router Admin Panel

0%

Open Admin Panel Now
Open Admin Panel NowAccess Router Panel
Access Router Panel – 2

• It does not matter whether you do this on your PC or your smartphone. As long as your device connected to the same router WiFi network, it will work fine. The only requirement is that your browser must be capable of handling HTML 5 pop-ups. If you have any device which is not more than 3 years old, it will work just fine.
• Once you have entered this IP address in the address bar, hit enter. Now press enter and you will be prompted to enter your user id and password. Here, you will have to enter the default user id and the default password for your router which has been provided by the manufacturer. In case you forgot then check out this guide to recover.
• Yes, I do not know what your default login credentials are, you will just have to refer them below list. All the required login credentials along with their respective manufacturers have been listed below. Just click on the drop-down menu and select your router’s brand.

Once you have entered the proper credentials, you should be able to directly login to the main page of your router’s firmware. From there, you can pretty much change or access any setting and reflect the changes in the router’s behavior.

Just make sure that you do not mess around with the advance settings which you do not know what you might end up screwing up your Internet connection and would probably have to call your ISP to get it fixed.

There are some aspects of your router which you may not be able to access because you like the administrative authority to change the settings. To get the administrator privileges will just have to log in with the admin user id and password. Doing that is straightforward. There is no secret password to be logged in as an administrator, believe it or not.

Just have to type the IP address in the address bar and hit enter once again. When you are ready to enter the user id and password, type admin in both fields and hit enter. It works every time on my D-Link ADSL router. I’m sure it’s the same thing for pretty much all the router which use the 192.168.1.2 IP gateway. Similarly, you can go for traditional IPs too such as 192.168.0.1 or 192.168.1.1.

Default Router Username & Password List

You can check any router’s default username & password from the drop-down list below.

What To Do If You Have Forgotten The User Id And Password

It happens to everyone. You might have recently change the default login credentials of your router and now we have forgotten them. If you have forgotten the user ID or password or both, you will not be able to login to the routers web interface anymore. Easy solution for that is to reset your router to the factory default settings simply.

To do that, you will have to find a small reset button which is present on your rotors body somewhere. Usually its present on the bottom. It is a pinhole-sized button which will have to press and hold for about 10 seconds using a pencil or a sharp tool, such as a toothpick. After this you will get new settings.

Bottom Line

This was of the General information regarding this 192.1 68.1.2 IP address. Hope you found this useful and now know how to get more out of your router by changing its settings to some tried and tested values, that better than the defaults. Cheers!

Unlike most manufacturers for use the 192.168.1.1 or 192.168.0.1 IP addresses for their gateways, some manufacturers such as Huawei make use of the 192.168.8.1 IP address to access the router’s functionalities. If you have one such modem and are making use of this IP address to access the former of the router, this article is the right one for you.

Here, you will learn everything you need to know about this IP address including how to login to it and how to reset your username and password in case you forget them.

Requirements And Constraints

There are a few requirements as well as a few constraints for you to log into this IP address and make changes in the phone par. The most prominent won’t be in that you should be in the vicinity of your router’s network meaning that you should be connected to the same network to do any changes in the firmware since this is not a public IP address.

You cannot find this page on the world wide web and you must be in the vicinity of your router, whatever it is situated. The second requirement is that you should have a device which supports HTML5 promise in a browser, which pretty much covers all the devices available out there right now. You don’t have to worry about this one.

How To Login To 192.168.8.1 IP Address

Here is how you can log into this IP address and make the necessary changes that you want to do.

• First, you need to type this http://192.168.8.1/ IP address in the address bar of your browser or simply click on “Access Router Panel” button mentioned below.

Access Your Router Admin Panel

0%

Open Admin Panel Now
Open Admin Panel NowAccess Router Panel
Access Router Panel – 2

• It doesn’t matter whether you are typing this in the browser on your PC off your mobile phone. Your only requirement as I mentioned earlier is that the night if I should connect to the same network as the router.
• Once you enter the IP and hit the enter key, you should prompt to enter a user id and password to log in. Just enter the default credentials that came with the router and you should be able to login to the firmware homepage without any problems.
• In case you do not know what the default login credential for your router is, refer the list below where a bunch of different devices made by individual manufacturers with their default login credentials has been listed. You can also refer to this guide to recover router password with ease.
• After you enter the correct login credentials, you will be authenticated and now you will be presented with the list of different options for security management, firmware update and more. Depending on the authority that this present profile of yours has over you can do changes in the setting as you please.
• Sometimes, you may not be able to do all the changes in the advanced settings of a network. This is because you do not possess the administrator privileges to do so. I suggest that you log in with the administrative profile to make the changes, provided that you know what you are doing.

This may or may not work on all routers, but on my D-Link a DSL router oh I have to do this enter admin for both user id as well as password. Then hit enter and log in as an administrator and then, I can do any changes that I want. Even if you have a router other than the D-Link brand, this is worth a shot.

Default Router Username & Password List

You can check any router’s default username & password from the drop-down list below.

What To Do If You Have Forgotten The User Id And Password

In case you have recently change the default user id and password, and I got them, you might worry as to how you can log into the firmware page again. You can do this by resetting the modem back to its factory settings. True that you have to find a reset button present on the body somewhere. It’s a small penis size button which will have to press and hold for 10 seconds using a narrow tool such as a toothpick or a pin.

So, this was about the General information regarding the 192.168.8.1 IP address. In case you have any two modems manufactured by companies like our way or GIGAFAST, this information might have been handy for you.

192.168.2.1 is one of the most popular IP addresses of your WiFi router. This it is slightly uncommon than the traditional IPs such as 192.168.1.1 or 192.168.0.1. It has more or less the same functionality as the former one. If you have discovered that your router uses this IP address and you want to know more about this, this article is the right place to be.

So now, we will learn more about what are the benefits of using this IP. How to login to 192.168.2.1 Gateway ?What are the possible problems that you can deal with by using this IP and the ways of changing this IP address.

How To Login To 192.168.2.1 IP Address

Here are the simple steps by following which you can log into this 192.168.2.1 IP gateway.

• First, enter the IP address http://192.168.2.1 in the address bar of web browser connected to the same network as the router or simply click on “Access Router Panel” button mentioned below.

Access Your Router Admin Panel

0%

Open Admin Panel Now
Open Admin Panel NowAccess Router Panel
Access Router Panel – 2

• It does not necessarily have to be a PC; you can do this on a mobile device as well. Just make sure that the mobile devices connected to the same WiFi router.
• Once you have entered this IP address into the search bar and hit enter. You are presented with a popup from which will ask you for the user id and password. Enter the default username and password that comes with your router. How it should be in the user manual or on their official website. If you do not know the default user id and password or have forgotten it, you can check for the default login credentials from the below list or recovery lost router password from here.
• Assuming that you know your default login lentils and have entered them. Please OK and you should be taken directly to the firmware page of your respective router. So there, you can change the router firmware version and updated to a latest one. If there is an update available, you can change your login credentials, change the advanced network settings and so much more.

Note that you may not be able to change some settings because you do not hold the authority to modify the settings. Even after login with the administrative privileges for that. Some routers will set a separate admin password but usually, the credentials are pretty straightforward. At least in my case of in a DSL router manufactured by D-Link, both the user id and password happen to be an admin, that’s it.

List of Default Router Username & Password

Here, you will find the list of all the default usernames and passwords needed to log in to the 192.168.2.1 IP gateway. Just click on the drop-down menu and select your router’s brand.

Problems That You Might Face With 192.168.2.1 IP

Note that these problems or not specific to the 192.168.2.1 IP address. And are universal to produce any router IP configuration. Limitations of using this IP address is that this is a local IP address for meaning that you have to be in the vicinity of your network. To do any changes to the power of the router, apparently. You cannot modify the address of your home router by connecting to some other network. Because, that it will have its dedicated server and a dedicated IP with separate login credentials to it.

You can check your manufacturer’s official website for more details. Regarding the changes as well as the limitations that can face while using that router’s firmware via its designated IP address. Once you get access to the administrative privileges, you can do a lot with your router’s default settings. You can change the passkey, refresh rate security configuration and more. With some knowledge and Research, you can get more out of your modem then you possibly thought was possible.

What To Do If You Have Forgotten The Username And Password

In case you have Recently changed the default username and password of your router. I forgot what they were, don’t worry. You can quickly reset your router to its default configuration and then login using the default credentials once again. To do that, you need to find a Reset key which is present in your router’s body. It is somewhere around the sides or on the bottom.

It’s a small pin sizeed button which you need to push. You can do it by using a toothpick or a thin, sharp tool for about 10 seconds. You have to push it to reset your router to its default configuration.

Once the router has reset, the lights blink and it will start back up again. Now you can connect to the network using the default id as I entered by the manufacturers. This is how you can reset it in case you forgot the login credentials to it.

So this was exciting and useful information about the 192.168.2.1 IP gateway. With the right amount of tweaking, you can get better control over your rotor. You can do necessary but essential stuff such as updating your firmware periodically in a more comfortable way.